HDPE butt fusion reducer is a special pipe fitting used to connect HDPE pipes of different diameters. The design of this pipe fitting allows smooth connection between pipes of different diameters while maintaining the integrity and functionality of the pipe system.
The main application scenarios of HDPE butt fusion reducer include building water supply and drainage, urban water supply system, urban gas supply, farmland irrigation and other fields. Its connection method is mainly achieved through hot melt technology, which is a reliable connection method that heats the end of the pipe to melt it, and then quickly connects the two pipes to fuse them together to form a strong connection. This connection method ensures the durability of the connection and the safety of the system.
The specific specifications of HDPE butt fusion reducer can be customized according to needs to meet various engineering needs. The use of this pipe fitting not only improves the flexibility of the pipeline system, but also ensures that the sealing and durability of the system are not affected during the conversion between pipes of different diameters. In addition, HDPE materials are widely used in various pipeline systems that need to withstand pressure and complex environmental conditions due to their unique advantages, such as corrosion resistance, high temperature resistance, and aging resistance.
Butt welding and fabricated methods are the most common method of joining polyethylene pipes of various diameters for the moments. The ends of the polyethylene tubes are heated and connected together under pressure from specialized equipment to form a continuous "leak-proof" conduit. Butt fusion pipes is as strong as the pipe itself and has the same life expectancy.
Brief Detail:
Product name |
HDPE butt fusion reducer |
Sizes available |
DN75-630mm |
SDR rating |
SDR11, SDR13.6, SDR17, SDR21, SDR26, SDR33, SDR41 |
Material |
Top quality new PE80 or PE100 raw material |
Colors available |
Black or blue, or as per request |
Standards follow to |
ISO4427/ AS/ NZS 4130/ BS EN 12201/ SABS standard |
Samples available |
Available |
D×d | E | e | L1 | L2 | L |
63/32 | 5.8 | 3 | 64 | 45 | 146 |
90/50 | 8.2 | 4.6 | 80 | 57 | 213 |
90/63 | 8.2 | 5.8 | 80 | 65 | 202 |
90/75 | 8.2 | 6.8 | 80 | 72 | 192 |
110/32 | 10 | 3 | 84 | 64 | 180 |
110/50 | 10 | 4.6 | 84 | 57 | 244 |
110/63 | 10 | 5.8 | 83 | 65 | 233 |
110/90 | 10 | 8.2 | 83 | 80 | 204 |
125/90 | 11.4 | 8.2 | 89 | 80 | 200 |
125/110 | 11.4 | 10 | 89 | 83 | 213 |
140/125 | 12.7 | 11.4 | 93 | 88 | 205 |
160/63 | 14.6 | 5.8 | 100 | 64 | 216 |
160/90 | 14.6 | 8.2 | 100 | 80 | 254 |
160/110 | 14.6 | 10 | 100 | 83 | 235 |
160/125 | 14.6 | 11.4 | 100 | 88 | 233 |
160/140 | 14.6 | 12.7 | 100 | 100 | 222 |
180/160 | 16.4 | 14.6 | 106 | 100 | 256 |
200/63 | 18.2 | 5.8 | 114 | 64 | 216 |
200/110 | 18.2 | 10 | 114 | 84 | 275 |
200/160 | 18.2 | 14.6 | 114 | 100 | 257 |
200/180 | 18.2 | 16.4 | 114 | 106 | 230 |
225/160 | 20.5 | 14.6 | 122 | 100 | 294 |
225/200 | 20.5 | 18.2 | 122 | 114 | 293 |
250/63 | 22.7 | 5.8 | 131 | 64 | 267 |
250/160 | 22.7 | 14.6 | 131 | 100 | 329 |
250/200 | 22.7 | 18.2 | 131 | 114 | 297 |
315/90 | 28.6 | 8.2 | 152 | 80 | 308 |
315/110 | 28.6 | 10 | 152 | 84 | 318 |
315/225 | 28.6 | 20.5 | 152 | 122 | 373 |
315/250 | 28.6 | 22.7 | 152 | 132 | 348 |
355/250 | 32.2 | 22.7 | 167 | 132 | 398 |
400/315 | 36.4 | 28.6 | 182 | 152 | 497 |
450/355 | 40.9 | 32.3 | 197 | 167 | 456 |
500/400 | 45.4 | 36.4 | 217 | 182 | 490 |
JUNNUO can supply various sizes HDPE butt welding fittings from DN75mm to DN630mm. HDPE butt welding fittings include: flange, equal-diameter tee, reducer tee, ball valve, coupling, elbow 45 degrees, Elbow 90 degrees and so on. Can be customized according to requirements, our HDPE fittings are high quality new and unused PE80 or PE100 raw materials, mainly used in HDPE water, oil and gas piping systems.
HDPE butt welding fittings are fully compliant with ISO4427/AS/NZS 4130/BS EN 12201/SABS standards.